If you find that your infill is unevenly distrubuted over the surface you may need to Drag Brush your surface more frequently. Drag Brushing involves pulling a large brush behind a suitable grounds vehicle. If you do not carry out this process then you may be interested in our RED RANGE  or alternatively we can offer the service ourselves. If you already carry out regular Drag Brushing but still have an issue of uneven infill distribution then we would ask you to look at your technique. Drag Brushing should be conducted in a structured way, with the aim being to move the infill back from the low-use areas to the high-wear areas. Pay attention to prevailing winds, the gradient of the surface and the nearest access gate, which will tend to be the high-wear point. Technical Surfaces would be pleased to give free advice on this subject or offer specific in-house training if required.